Rim thickness: 7 mm
Taking a range of 1.0mm to 2.5mm
1.The metal edge of the main body between the car door and the vehicle body.
2.In the car door and more of the outer edge.
3.In the window above the car.
4.Window panel minibus.
5.Border heavy equipment.
6.Covering the edge of the sharp metal.
7.Vinyl window decoration boat.
How to install:
1.Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing.
2.Uncover the tape from the tip of the lining (Ensure the tape is install inside the door).
3.Start from the top, insert the lining onto your door edge until the lining is fully seated.
4.Press the lining with your thumb along the door edge until it is fully seated.
5.Repeat step 4 until all edges are protected.
6.Use scissors to cut away unused lining for other door edges.
7.Let the lining dry up by itself and do not get wet for at least 12 hours.
8. Do not pull the car door seal after finishing sticking, do not wash the car within 3 days
1x 5M Rubber Edge Trim
If you want to purchase more longer one,we also have 32Ft(10M) Door Edge Guards. Please search ASIN B07CG41NXD
- ☘FITMENT- Rim thickness: 1 mm( 0.04″) . These door edge guards will protect your vehicle from nicks, chips & scratches, make sure it is suitable for your car before purchase.
- ☘INSTALLATION PLACE-In the metal edge of the car body between the car door and car body. In the external edge of the car door and more. The adhesive tape is designed to paste on the inside door edge, therefore it will not leave any residue on the outs.
- ☘MULTIFUNCTION-Also can be used to cover any sharp or dull metal edge, window seal or in crafting. There is an adhesive inside so it does stick but the thickness and size are smaller that most may want.
- ☘ADVANTAGES- Waterproof, isolator noise, corrosion resistance, high temperature resistance, wear resistance,anti-aging,UV resistance.
- ☘EASY TO INSTALL – Just push on the rubber seal above the install place. Note – Clean the door edge and make sure it is dry before install; Let the lining dry up by itself and do not get wet for at least 24 hours. Email us if any displeasure, we will try our best to solve it until you are satisfied.