1. Basic engine check system
1) Read dynamic data streams and MIL
2) Read readiness status
3) Query freeze frame data
4) Read current DTCs
5) Clear DTCs
6) O2 sensor monitoring test
7) On-board monitor test
8) Read pending DTCs
9) On-board system or component control
10) Read vehicle information
11) Read permanent DTCs
2.Support ABS SRS Testing
1)ABS Read DTCs, Clear DTCs Data Stream
2)SRS Airbag Read DTCs, Clear DTCs Data Stream
3)Covered mostly brand cars newer than 2006 with standard OBD2 protocol
4)Quick I/M Readness, one key engine check function
6)PC upgrade online
7)PC data printing support
3.supports Reset oil, Reset TPMS, and Reset BRAKE/EPB/ABS.
ThinkScan 600 Car list:
For AUDI , For BENZ , For BMW , For CHRYSLER , For CITROEN , For DACIA , For DAEWOO , For FIAT , For GM , For HOLDEN , For HONDA , For HYUNDAI , For JAGUAR , For JPISUZU , For KIA , For LANDROVER , For MAHINDRA , For MARUTI , For MAZDA , For MINI , For MITSUBISHI , For NISSAN , For OPEL , For PEUGEOT , For PORSCHE , For RENAULT , For SAAB , For SEAT , For SKODA , For SMART , For SPRINTER , For SUBARU , For SUZUKI , For TATA , For TOYOTA , For USAFORD , For VOLVO , For VW
Notice: For functional car models, please contact seller, thank you.
ThinkScan 600 Parameter:
Screen: TFT LCD true color display
Input voltage: 9-18V
Connection: standard 16 PIN OBD diagnostic interface
Working temperature: 0-50 degC
Storage ambient temperature: -20 to 70 degC
ThinkScan 600 Packing list:
ThinkScan 600 Register & Update Guide:
1. Go to http://www.mythinkcar.com to download the update tool and install it on the computer.
2. System requirements: Windows XP, 7, 8 or Windows 10.
Follow the steps below to update the tool:
1. Note down the Serial Number and Register code.
1).Connect one end of the USB cable to your tool, and the other end on the computer.
2).After the tool has powered up and entered the main menu screen, move the highlight bar on the “Help” icon and press [OK].
3). Highlight the “Tool Information” in Fig. 1 and press [OK].
4). Write down the Serial Number and Register code for later use.
2. Register the scanner on the update tool (for initial use).
1).Launch the update tool, a screen similar to Fig. 3 will appear
*Note: Once the S/N is entered, “Restore System” becomes activated, which is used to restore system if a new memory card is replaced.
2).Select the target language and enter the Product Serial Number, click [Device Upgrade], a screen similar to Fig. 4 will appear.
3).Enter the required E-mail address and Register Code, click [Submit] to finish the sign-up.
*Note: For initial use, user needs to go through a registration process. Once you finished it, the registration screen will not appear again each time you click the [Device Upgrade] button in the future.
3. Copy the update package into the memory card.
1).Install the memory card from the tool into the supplied memory card adaptor and insert into the USB port of the computer.
2).Reopen the update tool, select the updates you would like to performor click “Select All”, and then click [Download] to start downloading the update package into the memory card.
4. Reinsert the memory card into the tool and start update.
1).Once all steps are complete, find the mem
2). Connect the tool to the computer via USB cable.
3).The tool starts verifying the consistence of the local files with the files in the memory card. If difference exists, the tool will automatically start updating and a green update progress bar will appear on the bottom of the screen. Be patient to wait until the update is completely finished.
*Statement: All information and illustrations in this Quick Start Guide are based on the latest information available at the time of printing. Due to continuing improvements, actual product may slightly differ from the product described herein, and this
Quick Start Guide is subject to change without prior written notice.