LAUNCH X431 CRP909 Automotive Full System OBD2 Scanner Car Diagnostic Scan Tool
Launch Authorized Dealer.100% Original and Brand New.BUY with Confidence!!
LAUNCH X431 CRP909 OBD2 Car Diagnostic Scanner Professional OBD2 Scanner Airbag SAS TPMS EPB IMMO Reset OBD Auto Code Reader
LAUNCH X431 CRP909 Car Diagnostic Tablet Scanner is an newest evolutionary Android smart solution for 12V passenger car,light duty,pickup truck diagnosis & maintenance.Covering more than 105 car brands.it’s design for car repair garage,car beauty service parlors, auto mechanic and DIY car owners auto scanner .
This CRP909 OBD2 Scanner support All systems Diagnoses, 15 Reset Function,All OBD-II functions,
LAUNCH X431 CRP909 Support Diagnose Car Full System
This option allows you to detect whether the car full system parameters are normal or not. It mainly including Drive System, Chassis System, Body System, Electrical system.
1.PCM(Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear,
and more… 2. Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS
and more… 3.BCM(Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition.Electric Windows, Telephone,
and more… 4.Electrical System Including Centralized control system for engine and power transmission, Chassis integrated control and safety system,Intelligent body electronic system,Communication and information / entertainment system. Read and erase codes for all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog for easy data review.
LAUNCH CRP909 Support Below 15 Kinds Maintenance Functions:
In addition to amazing & powerful diagnostic function, CRP909 also features various service functions. The most commonly performed service functions contain：
1.Oil Lamp Reset Service
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil. 2.EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system’s safety and efficiency. 3.BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle. 4.DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit. 5.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration. 6.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors. 7.IMMO Key Programming
The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob. 8.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system. 9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed. 10.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off. 11.Gearbox (Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car. 12.AFS Headlamp Reset
‘AFS’ means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don’t turn when you turn the steering wheel.
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics Functions:
This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Professional Fast Identifies VIN Number:
Once connect with car OBD2 port , CRP909 will AutoDetect car Vin number. Give you a quick access to start the vehicle system detection.
Perfect Performs Vehicle Battery Analysis
For 12V car, SUV, Van, Light Truck, Pickup.
Detect real-time data from 12V batteries and display BATTERY DATA with fluctuations ranging from 8V to 16V.
The discharge voltage of a normal battery is about 12V, the starting voltage is generally 12V, and the charging voltage is about 14V.
One-Key I/M Checking
It support one-key I/M checking for all available emission systems.Help your car pass the emission test simpler.
LAUNCH X431 CRP909 Technical Support
LAUNCH Technical team offer free support for you, once you meet any problem, you can
1.Upload Could Feedback
2.Share Diagnose report
3.Contact with customer service directly
LAUNCH X431 CRP909 Support Languages
English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean.
You can switch language freely !
Other Feature of LAUNCH X431 CRP909
1.DTC Library: Allows you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.
2.Diagnostic Feedback: Use this option to submit the vehicle issue to us for analysis and the report can be saved offline.
3.Diagnose Report Share & Printed: you can share the diagnose report to your email ,then printed via computer.
4.Sensitive Touch & Keypad input are supported
5.Android 7.1 systems. 7” Touch Screen, 6000mAh battery
6.Global vehicle coverage.Including India and Russian car brands.
And many more…
LAUNCH X431 CRP909 Technical Parameters
Operating System:Android 7.1
Processor:Powerful Quad-Core Processor
Display:7 inch IPS touch screen
Connectivity:Mini USB 2.0, Wi-Fi
Battery:6000mAh lithium-polymer battery
Battery Life:more than 8 hours
Product Net Weight: 700g
LAUNCH X431CRP909 Car Supported List:
Full System Diagnose Scan: For Abarth, For Accura, For Alfa Remeo, For Audi, For BMW, For Bugatti, For Buick, For Cadillac, For Chevrolet, For Chrysler, For Citoren, For Dacia, For Daewoo, For Daihatsu, For Dodge, For Eurford, For Fiat, For Ford, For GM, For Gmsa, For Honda, For Hyundai, For Ifiniti, For Isuzu, For Jaguar, For Jeep, For Kia, For Lancia, For Landrover, For Lexus, For Lincoln, For Mahindra(Indian), For Maruti(Indian), For Maserati, For Mazda, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Nissangtr, For Opel, For Peugeot, For Porsche, For Renault, For Renault Samsung, For Saab, For Seat, For Skoda, For Smart, For Sprinter, For Ssangyong, For Subaru, For Suzuki, For Tata(Indian), For Tlisuzu, For Toyota, For Vauxhall, For Volvo, For VW, For VAZ
NOTE: These special function NOT for all car models, if you are confused, you can send your car brand, model and release year to me, I will check for you.
LAUNCH X431 CRP909 Package List:
1 * CRP909 Android Tablet
1 * OBD-II Diagnostic Cable
1 * DC Power Charging Cable
1 * User Manual
1 * Plastic Case
We accept PayPal payment.
Please contact us if you need to use another method to pay. Payment should be made within 3 days after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
We are not responsible for buyers’ local taxes.
Please include your special requests in eBay note if there is any.
Order will be shipped within1 businessdayafter payment confirmed via UPS or USPS or FedEx Groundfrom our warehousein UnitedState.
Delivery time varies from 2 to 6 business days. We will ship according to your EBAY address.
Please make sure it’s correct and include phone numberfor delivery.
If you do not receive your order in the estimated time, please contact us.
12 months free repair for the devices.
3 months for the accessories.
Items should be returned on buyers’ cost for repair or replacement. Please contact us firstly when you need warranty service. In case an item arrives faulty, please contact us in 7 days and keep it unused.
We will instruct you on how to return and get refund or replacement.
If after 7 days, or the item has been used, we have the right to decline your claim.
Who We Are?
We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 50 employees devoting to customer satisfaction.
Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.
Please feel free to contact us via eBay message once you have any question.
We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.